Serving Nassau County & Western Suffolk County Since 1963

RD Appliance Service, Corp.
Bosch Dishwasher Not Filling With Water

Bosch Dishwasher Not Filling With Water: The Ultimate Guide

Share

Facebook
Twitter
Pinterest
Email
Print

Is your Bosch dishwasher not filling with water, leaving you with dirty dishes and frustration? Don’t worry! We’ve got you covered. In this guide, we’ll discuss common reasons for this issue and provide helpful troubleshooting tips. Let’s dive in!

Why is My Bosch Dishwasher Not Filling With Water?

There could be several reasons why your Bosch dishwasher is not getting water. These reasons may include a clogged water supply line, a faulty water inlet valve, a malfunctioning float switch, or even an issue with the control panel. Let’s examine each potential cause in more detail.

Bosch Dishwasher Not Getting Water: Clogged Water Supply Line

A clogged water supply line is a common cause of a dishwasher not filling with water. Over time, debris, mineral deposits, leaks from the dishwasher hose, or even kinks in the hose can obstruct water flow. To check the supply line, follow these steps:

  1. Turn off the water supply and disconnect the power to the dishwasher.
  2. Locate the water supply line, usually found at the back of the dishwasher, and disconnect it.
  3. Inspect the line for any visible obstructions and remove them. Also, check for any kinks in the hose and straighten them out.
  4. If needed, run water through the line to ensure proper flow before reconnecting it to the dishwasher.
Bosch Dishwasher Not Getting Water

Bosch Dishwasher Hums but No Water: Faulty Water Inlet Valve

If your Bosch dishwasher hums but no water enters the appliance, it’s possible that the water inlet valve is faulty. The water inlet valve controls the flow of water into the dishwasher. If it’s damaged or not functioning correctly, your dishwasher won’t fill with water. To check the water inlet valve, follow these steps:

  1. Turn off the water supply and disconnect the power to the dishwasher.
  2. Locate the water inlet valve, which is typically found at the bottom of the dishwasher, near the front.
  3. Inspect the valve for any visible signs of damage or wear. If you see any issues, replace the valve.
  4. If you have the tools you may want to run a Bosch dishwasher water inlet valve test, to see if you can determine if that’s the issue. You will need a multimeter to test it, which your local appliance repair professional should have.

Control Panel Issues

Another possible cause for your Bosch dishwasher not filling with water could be a malfunctioning control panel. The control panel is responsible for sending signals to various components within the dishwasher, including the water inlet valve. If the control panel isn’t functioning correctly, it may not send the proper signals, preventing the dishwasher from filling with water or even cause your dishwasher not starting. You can try performing a reset, which is usually done by holding down the start button for over 5 seconds. If that doesn’t work you can try unplugging the dishwasher for at least a minute. If there’s a bigger issue a professional technician can diagnose the problem and determine if the control panel or another component is at fault.

Bosch dishwasher hums but no water

Float Switch Clogged or Malfunctioning

The float switch, located at the bottom of the dishwasher, monitors the water level inside the appliance. When the water reaches the designated level, the float switch signals the water inlet valve to close, preventing overfilling. If the switch is malfunctioning, the dishwasher may not fill with water, or it could overfill.

To inspect and replace the float switch, follow these steps:

  1. Disconnect the power to the dishwasher and turn off the water supply.
  2. Remove the lower dish rack and locate the float switch at the bottom of the dishwasher.
  3. Check for any debris or obstructions around the float switch that may be causing it to stick or not function properly. Clean any debris you find.
  4. If the float switch appears damaged or continues to malfunction after cleaning, replace it with a new one.

A Bosch dishwasher not filling with water can be a frustrating issue, but with the troubleshooting tips provided in this guide, you’ll be well-equipped to identify and resolve the problem. Remember to check the water supply line, water inlet valve, float switch, and control panel for any malfunctions or damage. If you’re still experiencing issues after trying these solutions, don’t hesitate to contact a professional appliance repair technician like the team at RD Appliance for assistance. With a little patience and effort, you’ll have your Bosch dishwasher running smoothly and efficiently in no time, ensuring clean and sparkling dishes for you and your family.

no time to clean your appliances?

our custom maintenance plans can help!